ACE HARDWARE CORP -- 288A100 PRO PVA LATEX WALL PRIMER -- 8010-00N069009
===================== Product Identification ===================== Product ID:288A100 PRO PVA LATEX WALL PRIMER MSDS Date:07/01/1994 FSC:8010 NIIN:00N069009 === Responsible Party === Company Name:ACE HARDWARE CORP Address:21901 S CENTRAL AVE City:MATTESON State:IL ZIP:60443 Country:US Info Phone Num:708-720-0600 Emergency Phone Num:708-990-6600 CAGE:ACEHA === Contractor Identification === Company Name:ACE HARDWARE CORPORATION Address:21901 SOUTH CENTRAL AVENUE City:MATTESON State:IL ZIP:60443 Country:US Phone:708-720-0600 CAGE:ACEHA ============= Composition/Information on Ingredients ============= Ingred Name:CLAY (KAOLIN); (ALUMINUM SILICATE) CAS:1332-58-7 RTECS #:GF1670500 Fraction by Wt: 23.1% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:2 MG/M3 TDUST Ingred Name:CALCIUM CARBONATE CAS:1317-65-3 RTECS #:EV9580000 Fraction by Wt: 9.2% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE) CAS:13463-67-7 RTECS #:XR2275000 Fraction by Wt: 2.8% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST Ingred Name:1-PROPANOL, 2-AMINO-2-METHYL-; (2-AMINO-2-METHYL-1-PROPANOL) CAS:124-68-5 RTECS #:UA5950000 Fraction by Wt: 0.2% OSHA PEL:10 PPM (MFR) ACGIH TLV:20 PPM (MFR) Ingred Name:AMMONIA (SARA 302/313) (CERCLA) CAS:7664-41-7 RTECS #:BO0875000 Fraction by Wt: <0.1% OSHA PEL:50 PPM ACGIH TLV:25 PPM;35 STEL EPA Rpt Qty:100 LBS DOT Rpt Qty:100 LBS Ingred Name:1,2-PROPANEDIOL; (PROPYLENE GLYCOL) CAS:57-55-6 RTECS #:TY2000000 Fraction by Wt: 2.3% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:NAPHTHA, HEAVY ALKYLATE; (NAPHTHA) CAS:64741-65-7 Fraction by Wt: 0.6% OSHA PEL:300 PPM ACGIH TLV:300 PPM Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER W/2,2,4-TRIMETHYL-1, 3-PENTANEDIOL; (ESTER ALCOHOL) CAS:25265-77-4 RTECS #:UF6000000 Fraction by Wt: 0.5% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:MINERAL OIL, SOLVENT REVFINED HEAVY PARAFFINIC, SEVERELY HYDROTREATED; (ALIPHATIC PETROLEUM DISTILLATE) CAS:64741-88-4 RTECS #:PY8040501 Fraction by Wt: 0.4% OSHA PEL:N/K ACGIH TLV:N/K Ingred Name:SILICA GEL; (AMORPHOUS SILICA) CAS:112945-52-5 RTECS #:VV7310000 Fraction by Wt: 0.1% OSHA PEL:6 MG/M3 ACGIH TLV:10 MG/M3 Ingred Name:SILICA, CRYSTALLINE - QUARTZ; (CRYSTALLINE SILICA) CAS:14808-60-7 RTECS #:VV7330000 Fraction by Wt: <0.1% OSHA PEL:10 MG/M3 (MFR) ACGIH TLV:0.1 MG/M3 RDUST ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE:IN A CONFINED AREA VAPORS IN HIGH CONCENTRATIONS ARE ANESTHETIC. IRRITANT TO UPPER RESPIRATORY SYSTEM. CHRONIC:PROBLEMS W/RESPIRATORY SYSTEM MAY BE AGGRAVATED BY EXPOSURE TO VAPORS. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:LIGHTHEADEDNESS & STAGGERED GAIT. Medical Cond Aggravated by Exposure:CHRONIC PROBLEMS W/RESPIRATORY SYSTEM MAY BE AGGRAVATED TO EXPOSURE TO VAPORS. ======================= First Aid Measures ======================= First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE - RESTORE BREATHING - KEEP WARM & QUIET. SKIN:WASH W/SOAP & WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. EYES:FLUSH W/WATER FOR AT L EAST 15 MINUTES. GET MEDICAL AID. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:199F,93C Extinguishing Media:NON-COMBUSTIBLE - FOR DRY SOLIDS USE WATER, FOAM, CO*2, DRY CHEMICALS. Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL CLOSED CONTAINERS. Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO EXTREME HEAT MAY RUPTURE DUE TO PRESSURE BUILD-UP. CONTENTS MAY SPATTER IF TEMPERATURE EXCEEDS 212F. ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE & REMOVE W/INERT ABSORBENT. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DOL STORAGE CATEGORY 3B. AVOID BREATHING VAPOR OR SPRAY MIST. AVOID CONTACT W/SKIN OR EYES. Other Precautions:KEEP OUT OF REACH OF CHILDREN. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR DEVICE. Ventilation:LOCAL EXHAUST: PREFERABLE. MECHANICAL (GENERAL): ACCEPTABLE. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS . Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI DESIGN CRITERIA . Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:212F,100C Vapor Density:HVR/AIR Spec Gravity:1.3 (H*2O=1) Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:INSOLUBLE Appearance and Odor:OFF WHITE PIGMENTED LIQUID W/SLIGHT AMMONIA ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NO HAZARDOUS REACTIONS ARE EXPECTED UNDER NORMAL USE. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:CARBON DIOXIDE & CARBON MONOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE OF I/A/W FEDERAL, STATE & LOCAL REGULATIONS REGARDING POLLUTION. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.