PARKS CORP -- MURIATIC ACID 20% -- 6810-00F026014
===================== Product Identification ===================== Product ID:MURIATIC ACID 20% MSDS Date:07/16/1988 FSC:6810 NIIN:00F026014 === Responsible Party === Company Name:PARKS CORP Address:MAIN ST Box:5 City:SOMERSET State:MA ZIP:02726 Country:US Info Phone Num:508-679-5938 Emergency Phone Num:508-679-5938 CAGE:GO179 === Contractor Identification === Company Name:PARKS CORP Address:MAIN ST Box:5 City:SOMERSET State:MA ZIP:02726 Country:US Phone:508-679-5938 CAGE:GO179 Company Name:PARKS CORPORATION Box:5 City:SOMERSET State:MA ZIP:02726 Country:US Phone:508-679-5938 CAGE:6L244 ============= Composition/Information on Ingredients ============= Ingred Name:HYDROCHLORIC ACID, HYDROGEN CHLORIDE, MURIATIC ACID HYDROCHLORIDE CAS:7647-01-0 RTECS #:MW4025000 Fraction by Wt: 20% Other REC Limits:7 PPM OSHA PEL:5 PPM ACGIH TLV:C 11 MG/CUM EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INHALATION: COUGHING, CHOKING, INFLAMMATION & ULCERATION OF RESPIRATORY TRACT. EYES: IRRITATION TO MUCOUS MEMBRANES. SKIN: BURNS. INGESTION: CORROSION OF MUCOUS MEMBRANES, ESOPHAGUS, STOMACH, DYSPHAGI A, NAUSEA, & VOMITING. Explanation of Carcinogenicity:NONE Effects of Overexposure:EYES: VISUAL DAMAGE. SKIN: DERMATITIS & PHOTO SENSITIZATION. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR IF NOT BREATHING. GIVE ARTIFICIAL RESPIRATION. GIVE OXYGEN BY QUALIFIED PERSONNEL IF BREATHING IS DIFFICULT. EYES: WASH THOROUGHLY FOR 15 MINS. SKIN: IMMEDIATELY FLUSH W/CLEAN WATER FOR 15 MINS. INGESTION: DRINK LARGE AMOUNTS OF WATER OR MILK. DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point:NON-FLAMMABLE Fire Fighting Procedures:COOL CONTAINERS W/WATER TO AVOID OVERHEATING. WEAR SELF-CONTAINED BREATHING APPARATUS & PROTECTIVE CLOTHING. Unusual Fire/Explosion Hazard:WATER APPLIED TO ACID WILL CAUSE HEATING/SPATTERING. WILL REACT W/MOST METALS TO PRODUCE HYDROGEN WHICH MAY FORM EXPLOSIVE MIXTURES W/AIR. ================== Accidental Release Measures ================== Spill Release Procedures:KEEP UPWIND. EVACUATE IF LEAK IS LARGE. IF NECESSARY TO ENTER SPILL AREA, WEAR SCBA & PROTECTIVE CLOTHING. NEUTRALIZE & FLUSH W/WATER TO REDUCE FUME. PROTECT METAL STRUCTURES FROM ACID. Neutralizing Agent:SODA ASH, LIME ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE ONLY IN APPROVED CONTAINERS OUT OF THE SUN & AWAY FROM HEAT & OXIDIZING AGENTS. AVOID CONTACT W/SKIN & EYES. AVOID BREATHING VAPORS. Other Precautions:DON'T TAKE INTERNALLY. HANDLE CAREFULLY. WHEN DILUTING ALWAYS ADD ACID TO WATER. DON'T USE AMMONIA DUE TO POTENTIAL FUMING PROBLEM. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH APPROVED CARTRIDGE FOR CONCENTRATION LEVELS ABOVE TLV LIMITS. Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL): REQUIRED. USE CORROSION RESISTANT MATERIAL. Protective Gloves:VINYL OR NEOPRENE RUBBER Eye Protection:SAFETY GOGGLES OR FACE SHIELD Other Protective Equipment:HARD OR SOFT BRIMMED HAT, SAFETY SHOES, RUBBER APRON, WATER SAFETY SHOWER, EYE WASH FOUNTAIN Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:230F Melt/Freeze Pt:M.P/F.P Text:-50F Spec Gravity:1.1 Evaporation Rate & Reference:(ETHER = 1): <1 Solubility in Water:COMPLETE Appearance and Odor:SHARP, PUNGENT ODOR, CLEAR, YELLOW, FUMING Percent Volatiles by Volume:0% ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES WATER, MOST METALS, ORGANIC AMINES, OXIDES, & POLYMERIZABLE MONOMERS (MAY REACT VIOLENTLY W/MANY INORGANIC MATERIALS) Stability Condition to Avoid:HEAT, SUN Hazardous Decomposition Products:HYDROGEN CHLORIDE GAS Conditions to Avoid Polymerization:ACID MAY INITIATE POLYMERIZATION OF ORGANIC OXIDES (E.G. ETHYLENE OXIDE OR OTHER MONOMERS) ==================== Disposal Considerations ==================== Waste Disposal Methods:NEUTRALIZE W/SODA ASH, LIME, W/ADEQUATE VENTILATION. COMPLY W/GOVERNMENT REGULATIONS ON DISPOSAL. DON'T USE AMMONIA DUE TO POTENTIAL FUMING PROBLEM. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.