CHEVRON -- BLACK PEARL GREASE EP NLGI 2, CPS254591  -- 9150-00N073791
<pre>=====================  Product Identification  =====================

Product ID:BLACK PEARL GREASE EP NLGI 2, CPS254591
MSDS Date:12/03/1991
FSC:9150
NIIN:00N073791
=== Responsible Party ===
Company Name:CHEVRON
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Info Phone Num:800-582-3835
Emergency Phone Num:800-582-3835
CAGE:0AHD1
=== Contractor Identification ===
Company Name:CHEVRON ENVIRONMENTAL HEALTH CENTER INC
Address:15299 SAN PABLO AVE
Box:4054
City:RICHMOND
State:CA
ZIP:94804
Country:US
Phone:800-582-3835
CAGE:0AHD1

=============  Composition/Information on Ingredients  =============

Ingred Name:LUBRICATING BASE OIL (MULTIPLE CAS# INVOLVED) (CONTAINING
    ONE OR MORE OF INGS 2 - 4)
Fraction by Wt: >75%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED
    (SEVERE) HEAVY NAPHTHENIC; (DISTILS, SOLV REFINED HEAVY NAPHTHENIC)
CAS:64741-96-4
RTECS #:PY8040001
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
    HEAVY NAPHTHENIC; (DISTILLATES, HYDROTREATED HEAVY NAPHTHENIC)
CAS:64742-52-5
RTECS #:PY8035001
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
    HEAVY PARAFFINIC; (DISTILS, HYDROTREATED HEAVY PARAFFINIC)
CAS:64742-54-7
RTECS #:PY8035501
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:ADDITIVES (INCLUDING INGS 6 & 7)
Fraction by Wt: <25%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CALCIUM HYDROXIDE
CAS:1305-62-0
RTECS #:EW2800000
Fraction by Wt: 1%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:5 MG/M3

Ingred Name:POLY (1,2-DIHYDRO-2,2,4-TRIMETHYLQUINOLINE);
    (TRIMETHYLDIHYDROQUINOLINE POLYMER (TDQ))
CAS:26780-96-1
RTECS #:TQ2625000
Fraction by Wt: 0.2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SUPDAT:DRIVING FORCE, MATL INJECTED INTO FINGERTIP CAN BE
    DEPOSITED INTO PALM OF HAND. W/IN 24 HRS, THERE IS (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8:USUALLY A GREAT DEAL OF SWELLING, DISCOLORATION &
    INTENSE THROBBING PAIN. IMMED TREATMENT AT SURGICAL (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9:EMERGENCY CENTER IS RECOMMENDED.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN CONT:THIS SUBSTANCE IS NOT
    EXPECTED TO CAUSE PRLNG/SIGNIFICANT IRRIT. THIS HAZ EVAL IS BASED
    ON DATA FROM SIMILAR MATLS. DERMAL TOX/INHAL/INGEST:SYSTEMIC TOX OF
    THIS SUBSTANCE HAS NOT BEEN DE TERMINED. HOWEVER, IT SHOULD BE
    PRACTICALLY NON-TOX TO INTERNAL ORGS IF IT GETS ON SKIN, IS
    INHALED/IS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SWALLOWED. THIS HAZ EVAL IS BASED ON
    DATA FROM SIMILAR MATLS. HIGH-PRESS EQUIP INFO:ACCIDENTAL
    HIGH-VELOCITY INJECTION UNDER SKIN OF MATLS OF THIS TYPE MAY RSLT
    IN SERIOUS INJURY. SEEK MED AT TN AT ONCE SHOULD ACCIDENT LIKE THIS
    OCCUR. INITIAL WOUND AT INJECTION SITE MAY NOT APPEAR TO BE SERIOUS
    AT (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE FROM EXPOS. SUPPORT BRTHG (GIVE ARTF RESP/O*2) .
    INGEST:CALL MD IMMED . EYES:FLUSH W/FRESH WATER FOR AT LST 15 MINS.
    REMOVE CONT LENSES IF WORN. SKIN:WASH THORO W/SOAP & WATER . REMOVE
    & WASH CONTAM CLTHG. NOTE TO MD:IN AN ACCIDENT INVOLVING HIGH-PRESS
    EQUIP, THIS PROD MAY BE INJECTED UNDER SKIN. SUCH AN ACCIDENT MAY
    RSLT IN SM, SOMETIMES BLOODLESS, PUNCTURE WOUND. (SUPDAT)

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO*2, DRY CHEMICAL, FOAM & WATER FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .

==================  Accidental Release Measures  ==================

Spill Release Procedures:THIS MATERIAL IS NOT EXPECTED TO PRESENT ANY
    ENVIRONMENTAL PROBLEM. CLEAN UP SPILLS IMMEDIATELY, OBSERVING
    PRECAUTIONS IN PROTECTIVE EQUIPMENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED OR FREQUENTLY REPEATED
    SKIN CONTACT W/THIS MATERIAL. READ THE ENTIRE DOCUMENT & LABEL
    BEFORE USING THIS PRODUCT.
Other Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER. RESIDUE MAY
    IGNITE W/EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY. CAUTION! DO NOT
    USE PRESSURE TO EMPTY DRUM OR DRUM MAY RUPTURE WITH EXPLOSIVE
    FORCE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN . NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
    REQUIRED.
Ventilation:NO SPECIAL VENTILATION IS NECESSARY.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EYE WASH FOUNTAIN & DELUGE
    SHOWER . SKIN CONTACT CAN BE MINIMIZED BY WEARING PROTECTIVE
    CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:CARBON MONOXIDE. EFTS OF OVEREXP:FIRST; BUT, IF LEFT
    UNTREATED, COULD RSLT IN DISFIGUREMENT/AMPUTATION OF AFFECTED PART.
    THIS PROD CNTNS PETRO BASE OILS WHICH MAY BE REFINED BY VARIOUS 
    PROCESSES INCL SEV SOLV EXTRACTION, SEV HYDROCRACKING/SEV
    HYDROTREATING. FIRST AID PROC:HOWEVER, BECAUSE OF ITS (ING 8)

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:473F,245C
Vapor Pres:<1 @ 40C
Spec Gravity:0.95
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BLACK GREASE.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZING AGENTS, SUCH AS CHLORATES, NITRATES,
    PEROXIDES, ETC.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUST FORMS CARBON DIOXIDE,
    WATER VAP & MAY PRDCE OXIDES OF NITROGEN. INCOMPLETE COMBUST CAN
    PRODUCE (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . PLACE CONTAMINATED MATERIALS IN DISPOSABLE CONTAINERS
    & DISPOSE OF IN A MANNER CONSISTENT W/APPLICABLE REGULATIONS.
    CONTACT LOC ENVIRO N/HLTH AUTHS FOR APPROVED DISPOSAL OF THIS MATL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.