PPG INDUSTRIES INC -- QUICK DRY ENAMELS, 54-B (041390M), 54-330  -- 8010-00N065491
<pre>=====================  Product Identification  =====================

Product ID:QUICK DRY ENAMELS, 54-B (041390M), 54-330
MSDS Date:06/01/1990
FSC:8010
NIIN:00N065491
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC
Address:260 KAPPA DR
City:PITTSBURGH
State:PA
ZIP:15238
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:47695
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:ALUMINUM SILICATE
CAS:1335-30-4
Fraction by Wt: 30-35%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PIGMENTS
Fraction by Wt: 15-20%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC
CAS:64742-88-7
Fraction by Wt: 2-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)
CAS:64475-85-0
RTECS #:PY8240000
Fraction by Wt: 25-30%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC
CAS:64742-88-7
Fraction by Wt: 40-45%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:XYLENE (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 2-5%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 70-75%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:EFTS OF OVEREXP: SIGNIFICANT HAZ FOR MAN. EYE WATERING,
    HDCH, NAUS, DIZZ, & LOSS OF COORD ARE INDICATIONS THAT (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8: SOLV LEVELS ARE TOO HIGH. REDNESS, ITCH, BURNING
    SENSATION & VISUAL DISTURB MAY INDICATE EXCESS EYE CONT.(ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: DRYNESS, ITCH, CRACKING, BURNING, REDNESS & SWELLING
    ARE CONDITIONS ASSOCIATED WITH EXCESSIVE SKIN CONTACT.
RTECS #:9999999ZZ

Ingred Name:FIRST AID PROC: EXCESSIVE EXPOSURE TO A CORROSIVE MATERIAL,
    PERSISTENT SKIN/EYE IRRITATION OR BREATHING DIFFICULTIES.
RTECS #:9999999ZZ

Ingred Name:RESP PROT: DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST
    WHICH RESP IS EFFECTIVE & HOW IT IS TO BE PROPERLY FITTED.
RTECS #:9999999ZZ

Ingred Name:VENT: STATED LIM, & TO REMOVE DECOMPOSITION PRODUCTS DURING
    WELDING OR FLAME-CUTTING ON SURFACES COATED W/THIS PRODUCT.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL/FATAL IF
    SWALLOWED. EYE: SEV IRRIT. SKIN: MAY CAUSE MOD IRRIT. INHAL: VAP &
    SPRAY MIST MAY BE HARMFUL IF INHAL. VAP IRRIT EYES, NOSE & THROAT.
    RPTD EXPOS TO HIGH VAP CONCS MAY C AUSE IRRIT OF RESP SYS & PERM
    BRAIN & CNS DMG. INTENTIONAL MISUSE BY DELIBERATELY CONC & INHAL
    CONTENTS(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CAN BE HARMFUL/FATAL. CHRONIC: AVOID
    LONG TERM & RPTD CONT. PROD CONTAINS TITANIUM DIOXIDE. ANIMALS
    INHAL MASSIVE QTYS IF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY
    DEVELOPED LUNG TUMORS. POTE NTIAL FOR INHAL OF TITANIUM DIOXIDE
    DUSTS FROM COATINGS IS VERY LIM. SINCE OVEREXP ARE NOT EXPECTED,
    THERE IS NO (ING 8)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH W/PLENTY OF WATER FOR
    AT LEAST 15 MIN. SKIN: REMOVE PROMPTLY BY WIPING, FOLLOWED BY
    WATERLESS HAND CLEANER & SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
    APPLY ART F RESP & OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER: IF
    ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD, CONT
    POIS CTL CTR, EMER ROOM/MD IMMED: (HAVE MSDS INFO AVAIL>) INGEST,
    (ING 11)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:0.8%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
    CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA
    (SUP DAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE USED TO COOL CLSD CONTRS
    TO PVNT PRESS BUILD-UP & POSS (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPARKS & OPEN FLAMES. CLSD CONTRS MAY EXPLODE
    WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUP DAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
    RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
    SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
    ABSORB MATL & PLACE INT O CONTRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
    READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG MIX MAY
    HAVE THE HAZ OF ALL OF ITS PARTS. CONTRS SHOULD BE GROUNDED WHEN
    POURING. AVOID FRE E FALL OF LIQS IN EXCESS OF FEW INCHES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
    VENT CTLS, VAP EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C)
    PAINT SPRAY/AIR SUPP (TC-19C) RESP MAY ALSO REDUCE EXPOS. READ RESP
    MFR'S INSTRUCTIONS &  LITERATURE CAREFULLY TO (ING 12)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
    KEEP CONC BELOW LOWEST SUGGESTED EXPOS LIM, LEL BELOW (ING 13)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUB, (SUP DAT)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:IMPERMEABLE APRON. EMERGENCY EYEWASH &
    DELUGE SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Supplemental Safety and Health
EXTING MEDIA: CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC:
    AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER USED, FOG NOZZ
    ARE PREFERABLE. EXPLO HAZ: SURF. TOX GASES MAY FORM WHEN PROD IS
    CONT BY  FLAME/HOT SURF. HAZ DECOMP PROD: PRODUCE FUMES INCL CARBON
    MONOXIDE. PROT GLOVES: POLYVINYL ALCOHOL.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.3
Evaporation Rate &amp; Reference:<19 (BUTYL ACETATE=100)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQUID, W/AN ODOR CHARACTERISTIC OF THE
    SOLVENTS LISTED IN INGS SECTION
Percent Volatiles by Volume:<88

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
    HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURF COATED W/THIS PROD
    MAY (SUP DAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
    EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
    APPROVED WASTE MANAGEME NT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.