TRAVACO LABORATORIES INC -- MARINE TEX  -- 8030-00N031802
<pre>=====================  Product Identification  =====================

Product ID:MARINE TEX
MSDS Date:01/01/1992
FSC:8030
NIIN:00N031802
=== Responsible Party ===
Company Name:TRAVACO LABORATORIES INC
Address:345 EASTERN AVE
City:CHELSEA
State:MA
ZIP:02150
Country:US
Info Phone Num:617-884-7740
Emergency Phone Num:617-884-7740
Preparer's Name:RALPH TRAVERS
CAGE:51198
=== Contractor Identification ===
Company Name:TRAVACO LABORATORIES INC
Address:345 EASTERN AVE
Box:City:CHELSEA
State:MA
ZIP:02150
Country:US
Phone:617-884-7740
CAGE:51198

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 50%

Ingred Name:CLAY; (KAOLIN)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 50%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50: (ORAL) >2 G/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL: HAS POTENTIAL TO CAUSE NAUSEA &
    RESPIRATORY TRACT IRRITATION WHEN HEATED TO HIGH TEMPERATURES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER FOR AT LEAST 15 MIN WHILE HOLDING
    EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN: FLUSH WITH WATER. INHAL:
    IF EXPOSED TO HIGH CONCENTRATION OF VAPORS, REMOVE TO FRESH AIR.
    INGEST: GET  MD IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:480F,249C
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM, OR CARBON
    DIOXIDE.
Fire Fighting Procedures:WATER SHOULD BE USED TO KEEP FIRE EXPOSED
    CONTAINERS COOL. GOGGLES, EYE PROTECTION NOT PROVIDED. WEAR
    NIOSH/MSHA APPROVED SCBA AND FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO
    BUILD- UP PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE IGNITION SOURCES, COMPLETELY ABSORB
    WITH INERT MATERIAL& SCOOP, & PUT IN DISPOSAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTAMINATION OF SKIN. KEEP AWAY
    FROM HEAT AND OPEN FLAME.
Other Precautions:SPI CLASS 2, ANSI STANDARD K68.1-1978.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE LIKELY NEEDED. USE WITH ADEQUATE
    VENTILATION. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: RECOMMENDED WHEN APPROPRIATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:500F,260C
Vapor Pres:<0.1 @ 20C
Vapor Density:HVR/AIR
Spec Gravity:2.5 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:NONE
Appearance and Odor:LIQUID, OR PASTE... MILD ODOR.
Percent Volatiles by Volume:< 1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, MERCAPTANS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO2, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY IN LANDFILL IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS. U.S. EPA DOES NOT DEFINE THIS PRODUCT
    AS A HAZARDOUS WASTE UNDER RCRA.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.