FIBRE GLASS-EVERCOAT CO.,INC. -- SMC/FRP REPAIR EPOXY MENDER, 645 -- 8010-00N026821
===================== Product Identification ===================== Product ID:SMC/FRP REPAIR EPOXY MENDER, 645 MSDS Date:08/25/1988 FSC:8010 NIIN:00N026821 === Responsible Party === Company Name:FIBRE GLASS-EVERCOAT CO.,INC. Address:6600 CORNELL ROAD City:CINCINNATI State:OH ZIP:45242-2033 Country:US Info Phone Num:513-489-7600 Emergency Phone Num:800-543-4530 CAGE:18731 === Contractor Identification === Company Name:FIBRE GLASS-EVERCOAT CO INC Address:6600 CORNELL ROAD Box:City:CINCINNATI State:OH ZIP:45242 Country:US Phone:513-489-7600 CAGE:18731 ============= Composition/Information on Ingredients ============= Ingred Name:BISPHENOL-A BASED EPOXY RESIN CAS:25068-38-6 Fraction by Wt: <30% Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE) CAS:13463-67-7 RTECS #:XR2275000 Fraction by Wt: <10% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST; 9293 Ingred Name:TALC, POWDER (CONTAINING NO ASBESTOS) CAS:14807-96-6 RTECS #:WW2710000 Fraction by Wt: <50% OSHA PEL:2 MG/M3 RDUST ACGIH TLV:2 MG/M3 RDUST Ingred Name:POLYAMIDE Fraction by Wt: <20% Ingred Name:INORGANIC MATERIALS; (INORGANIC FIBER) Fraction by Wt: <20% ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: SKIN: CAUSES IRRITATION. EYES: CAUSES SEVERE IRRITATION. INHAL: IRRITATION TO RESPIRATORY TRACT. INGEST: HARMFUL TO GASTROINTESTINAL TRACT. CHRONIC EFFECTS: PROLONGED OR REPEATED EXPOSURE MAY C AUSE ASTHMA AND SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSE. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:SKIN: WASH W/SOAP & WATER. IF IRRITATION DEVELOPS, GET MED ATTN. EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR A MINIMUM OF 15 MINUTES. GET MED ATTN. INHAL: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS DIFFICULT. GET MED ATTN. INGEST: DRINKWATER TO DILUTE AND GET IMMED MED ATTN. ===================== Fire Fighting Measures ===================== Flash Point Method:CC Flash Point:>200F,>93C Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY BE TOXIC. ================== Accidental Release Measures ================== Spill Release Procedures:TAKE UP W/ABSORBENT MATERIAL SUCH AS VERMICULITE, SAND, EARTH, ETC. WASH CONTAMINATED AREA WITH SOAP & WATER. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE IN ORIGINAL TIGHTLY CLOSED CONTAINERS. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC VAPOR CARTRIDGE RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY. WEAR NIOSH/MSHA APPROVED DUST MASK WHEN SANDING CURED PRODUCT. Ventilation:GOOD GENERAL MECHANICAL VENTILATION AND LOCAL EXHAUST IF NEEDED. Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:V3 Boiling Pt:B.P. Text:>392F,>200C Vapor Density:>1 Spec Gravity:1.6 Solubility in Water:NIL Appearance and Odor:GREY AND WHITE PASTE-SHARP ODOR. Percent Volatiles by Volume:0 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS AND ACIDS. Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, OXIDES OF NITROGEN. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.