CON-LUX COATINGS, INC. -- PRIMER SURFACER WHITE -- 8010-00-664-6302
=====================  Product Identification  =====================

Product ID:PRIMER SURFACER WHITE
MSDS Date:04/22/1988
FSC:8010
NIIN:00-664-6302
=== Responsible Party ===
Company Name:CON-LUX COATINGS, INC.
Address:226 TALMADGE RD.
Box:847
City:EDISON
State:NJ
ZIP:08818-0847
Info Phone Num:(201) 287-4000
Emergency Phone Num:(201) 287-4000
CAGE:60189
=== Contractor Identification ===
Company Name:CON-LUX COATINGS INC
Address:226 TALMADGE RD
Box:847
City:EDISON
State:NJ
ZIP:08818-0847
Country:US
Phone:732-287-4000
CAGE:60189

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS
CAS:64742-86-7
Fraction by Wt: >1%
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:MAGNESIUM SILICATE HYDRATE
CAS:1343-90-4
RTECS #:OM4360000
Fraction by Wt: >1%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/CUM

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: >1%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE/INGESTION: IRRITATION.
    INHALATION: IRRITATION TO THE RESPIRATORY TRACT, HEADACHE, NAUSEA,
    DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYE/INGESTION: IRRITATION. INHALATION:
    IRRITATION TO THE RESPIRATORY TRACT, HEADACHE, NAUSEA, & DIZZINESS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
    WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR OR
    OXYGEN IF NEEDED. TREAT SYMPTOMATICALLY. INGESTION: DRINK 1 OR 2
    GLASSES OF	WATER TO DILUTE. DON'T INDUCE VOMITING.IF SPONTANEOUS
    VOMITING OCCURS KEEP HEAD AT OR BELOW KNEE LEVEL TO PREVENT
    ASPIRATION INTO THE LUNGS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:105F
Lower Limits:1%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, & WATER MIST.
Fire Fighting Procedures:SMOTHER FLAMES W/ONE OF EXTINGUISHING MEDIA.
    WATER MAY BE USED TO COOL DOWN UNOPENED CONTAINERS IN VICINITY.
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. WEAR
    APPROPRIATE PERSONAL PROTECTION EQUIPMENT & APPROVED RESPIRATOR.
    CONTAIN SPILL W/ABSORBENT MATERIAL & PUT INTO VAPOR TIGHT
    CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN APPROPRIATE AREAS. GROUND
    CONTAINERS WHEN POURING LIQUIDS & POWDERS TO AVOID STATIC CHARGE
    BUILD UP.
Other Precautions:PROVIDE ADEQUATE VENTILATION OR RESPIRATORY
    PROTECTION TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR FLAME
    CUTTING COATED SURFACES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR OR OPEN AREA, USE APPROVED RESPIRATOR
    TO REMOVE SOLID AIRBORNE PARTICLES OF OVER SPRAY DURING SPRAY
    APPLICATION. IN RESTRICTED VENTILATION AREAS USE APPROVED
    RESPIRATOR DESIGN TO REMOVE A C OMBINATION OF PARTICLES & VAPOR.
Ventilation:PROVIDE SUFFICIENT VENTILATION, IN VOLUME & PATTERN TO KEEP
    AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60.45%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:EXTREME HEAT, SPARKS, OPEN FLAMES, &
    SOURCES OF IGNITION.
Hazardous Decomposition Products:HAZARDOUS FUMES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS. PREVENT MATERIAL FROM CONTACTING ANY WATER
    SOURCES OR SEWERS LEADING TO SURFACE WATERS. FLAMMABLE LIQUID.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.